Cleaning of Pipe Fittings (二)
2. Pickling objects
(1) Steel pipes that have not been pickled before pre-installation;
(2) Steel pipes that have been pickled but are seriously corroded.
3. Pickling construction sequence and treatment purpose
(1) Degreasing Use degreasing agent to remove grease adhering to the piping;
(2) Washing Remove the dirt on the pipe with water;
(3) Rust removal Remove rust spots and rolling iron chips on the pipe wall in the pickling solution;
(4) Water washing and high-pressure water rinsing Rinse the adherents generated in the above operations with water, and rinse the inside of the pipe with high-pressure water;
(5) Neutralization Neutralize the residual acid on the pipe with lye;
(6) Drying For effective drying the pipe should be immersed in hot water or steam dried and should be allowed to dry out;
(7) Rust prevention;
(8) Inspection The pickled pipe is inspected for cleanliness;
(9) Packaging and storage Immediately after pickling, seal the open part of the pipe with plastic or plastic tape to avoid the intrusion of foreign matter and water.






