+86-411-86306776

Pickling Of Pipeline

Dec 28, 2021

About pickling of pipeline, there are some notes for pickling:


Before pickling the pipe, the pressure test shall be carried out as required (the test pressure shall be 1.5-2 times of the highest working pressure). In case of unqualified, repair welding can be done according to the aforementioned welding seam repair provisions. After passing the pressure test, prepare pickling.


degreasing should be done before pickling, and acid prevention measures should be taken on the thread and sealing surface.


For pipes coated with paint, paint remover shall be applied before pickling.

The concentration and proportion of each component of the pickling liquid should be determined according to the corrosion degree of the pipeline and the quality of the pickling water.


After pickling, if compressed air is sprayed for protection, the compressed air must be dry and clean.

Pickling water must be clean.

Pickling should be based on the degree of corrosion, acid concentration and temperature, grasp the pickling time, not excessive pickling.


The pipeline should be circulated as soon as possible after pickling reset, otherwise it should be circulated 2-3 times a week.
Send Inquiry