In the offshore engineering ship industry, a large number of pipelines are used for the transmission of oil, natural gas, high-pressure water and hydraulic oil, etc. These working conditions will put forward high requirements for the safety and reliability of pipelines and sealing performance. Therefore, the safety and reliability of pipe joint is particularly important.
Traditional pipe connection technology uses welding method for hard pipe connection. This connection technology has the disadvantages of large workload, long time consuming, poor stability, easy corrosion, poor pipeline cleanliness and so on. It is often not possible to re-weld pipe joints to troubleshoot faults on working vessels and drilling platforms. The weldless pipeline connection technology can overcome these shortcomings and achieve simple and reliable pipeline connection. The pipeline using this technology is easy to disassemble, reliable performance, low requirements for management and installation technicians, and has been widely praised by shipyards and shipowners.
It can be seen that the implementation of non-welding pipeline connection technology not only improves the construction conditions, reduces the difficulty of operation, but also reduces the environmental pollution caused by welding, achieves the effect of energy saving and emission reduction, and has good economic and social benefits.
Commonly used non - welding technology mainly includes flaring pipe connection technology, sleeve pipe connection technology and so on. As a new pipe connection method, WALFORM pipe end molding technology is regarded as the best anti-leakage solution at present.
WALFORM technology consists of just three parts: 24° conical joint body, nut and seal ring. Conventional DIN joints and DIN nuts are used to connect the molded pipe ends, and a seal ring is installed on the only possible leak path. The joint body is in full compliance with DIN2353 and ISO 8344-1 standards. It has the characteristics of high nominal pressure grade, absolute leakproof, reliable pipe fixation, fast assembly and high dynamic bearing capacity. Through the special steel tube forming equipment, the steel tube is cold extrusion remolding, so that the steel tube deformation is uniform, and easy to control the quality, and no pitting corrosion and crack.
Most of the large offshore oil platforms and offshore engineering ships at home and abroad use the advanced WALFORM weldless pipeline technology.






