SAE 37 flare flange will be sent to customer this week.
JIERUI is Chinese manufacturer and supplier of SAE 37 flare flange, and we could offer you good quality products and best service.
We have strict process about whole production:
1.we always keep the tubes stored indoors away from rain and moisture, and ensure all the tube ends with plugs to protect the tube.
2.after cutting the tube, we will put plug in the tube end that we donot use.
3.after cutting, the pipe is de-burred inside and outside, and then we will wipe it by cloth to ensure remove any metal particles.
4.clean the flaring cone and dies before fitting to the flaring machine, and ensure the correct size cone and dies are selected for the tube size.
-----tools must be kept clean and lubricated
-----tools must be checked regularly
5.placing the pipe between the dies and push it against the stopper. Ensure the pipe is positioned horizontally and aligned with the flaring machine.
So, we could be your SAE 37 flare flange supplier, and we could offer you satisfied products.
